-20-
{16:9 Normal} – For a disc with the
aspect ration of 4:3, the output video is
resized vertically to match what will be
seen on the display.
{4:3 Pan&Scan} – For standard TV,
Display a wide picture on the entire
screen and cuts off the redundant
portions.
{4:3 Letterbox} – For standard TV,
Display a wide picture with two black
borders on the top and bottom of 4:3
screen.
• [Resolution]
Select a video output resolution that is
compatible with your TV display
capability.
{Auto} – Select the most suitable
resolution according to the input video.
{480I/576I},{480P/
576P},{720P},{1080I},{1080P} – Select
a video resolution setting that is best
supported by the TV, See TV manual for
details.
• [TV System]
If the video does not appear correctly,
change the setting.By default, this
setting matches the most common
setting for TVs in your country
{NTSC} – For NTSC-system TV.
{PAL} – For PAL-system TV.
{Multi} – For Multi-system
TV,compatible with both PAL and
NTSC.
• [Color Space]
Select a predenned color space of
picture
{RGB} – Select RGB color space.
{YCbCr} – Select YCbCr color space.
{YCbCr422} – Select YCbCr422 color
space
{Full RGB} – Select Full RGB color
space.
• [HDMI Deep Color]
This feature is available only when the
display device is connected by a HDMI
cable, and when it supports deep color
feature.
{Off} – Output standard 24 bit color.
{30 bits} – Output 30 bits color.
{36 bits} – Output 36 bits color.
• [HDMI 1080P 24Hz]
{On} – Enable to select this video
resolution setting.
{Off} – Disable to select this video
resolution setting.
[Video Process]
• [Video Adjust]
Select a predened set of the video.
1. Press OK .
2. Press to adjust the video
Brightness, Contrast, Hue and
Saturation.
3. Move to [Exit] to exit.
Brightness
Contrast
Hue
Satutation
Return ExitChange
• [Sharpness]
Select the sharpness level: High,
Middle, Low.
Audio Setting
1. Press. PressPress SETUP
[General Setting] menu is displayed.
2. Press. PressPress to select [Audio Setting],
then press .
3. Select an option, press. Select an option, pressSelect an option, press to access.
Home Exit
Audio Output
Spdif
PCM
PCM
48K
Use cursor key to move focus,use
“Enter ” key ro select
HDMI
Down_samp
OffDRC
... Audio Setting...
4. Press. PressPress to select a setup option andto select a setup option and
press
5. Select the setting you wish to change
and press OK to conrm.
- Press to return to the previous
menu.
- Press SETUP to exit the menu.
[Audio Output]
• [Spdif]
Select the output mode of Digital Out
jack, options include Bitstream, PCM,
Reencode and Off.
Customizing
Commentaires sur ces manuels